Built in File Browser"

This website contains links to software which is either no longer maintained or will be supported only until the end of 2019 (CKFinder 2). For the latest documentation about current CKSource projects, including software like CKEditor 4/CKEditor 5, CKFinder 3, Cloud Services, Letters, Accessibility Checker, please visit the new documentation website.

If you look for an information about very old versions of CKEditor, FCKeditor and CKFinder check also the CKEditor forum, which was closed in 2015. If not, please head to StackOverflow for support.

Line 35: Line 35:
 
var _QuickUploadLanguage = 'php' ;
 
var _QuickUploadLanguage = 'php' ;
 
</pre>  
 
</pre>  
=== Versions Prior to 2.2 ===
 
  
To change the default configuration open your fckconfig.js file and look for the '''LinkBrowserURL''', '''ImageBrowserURL''' and '''FlashBrowserURL''' settings. You will see one uncommented line that points to the ASP File Browser (look at the end of the line) and many commented lines for the other languages. So, just comment the ASP one and uncomment the line of your preferred language.
 
 
For example, to use the PHP connector, just uncomment the following lines:
 
<pre>FCKConfig.LinkBrowserURL = FCKConfig.BasePath + 'filemanager/browser/default/browser.html?Connector=connectors/php/connector.php';
 
FCKConfig.ImageBrowserURL = FCKConfig.BasePath + 'filemanager/browser/default/browser.html?Type=Image&amp;Connector=connectors/php/connector.php';
 
FCKConfig.FlashBrowserURL = FCKConfig.BasePath +
 
'filemanager/browser/default/browser.html?Type=Flash&amp;Connector=connectors/php/connector.php';
 
</pre>
 
'''NOTE''': For the ASP.NET and Java integration, you respectively download and correctly install the FCKeditor.Net and FCKeditor.Java packages from our download web site: http://www.fckeditor.net/download.
 
 
'''NOTE 2''': Very helpful for debugging (for example the path configuration) may be the '''...filemanager/browser/default/connectors/test.html''' file.
 
 
'''NOTE 3''': In the current SVN and 2.5 you can debug the configuration of the connectors with '''editor/filemanager/connectors/test.html''' and '''editor/filemanager/connectors/uploadtest.html'''
 
  
 
== Uploading Files ==
 
== Uploading Files ==

Revision as of 14:46, 16 January 2008

Built in File Browser

The editor gives the end user the flexibility to create a custom file browser that can be integrated into it or to use the default file browser provided with the editor. This is a powerful feature because each scenario has unique requirements and the default file browser may not always meet them.Still, the editor package offers a default implementation of the File Browser so the user has a ready-to-use file browsing component, without having to develop anything.

In prior versions, a sample File Browser was available for each supported server side technology. The problem with this approach is that each sample had a different implementation and worked completely differently from one another. And worse, some of them were really poor.

To solve that problem the current version offers a unique user interface that can be used by all server side languages. The user interface was developed completely using Javascript DHTML and its integration is facilitated by XML. Doing it this way allows the developer to focus on their unique file browser requirements while not worrying about the presentation (client-side) layer.

The following graphic shows how the File Browser Integration works:

Image:FCKeditor_FileBrowserConnector.gif

The XML Response looks similar to this:

<?xml version="1.0" encoding="utf-8" ?>
<Connector command="" resourceType="">
<CurrentFolder path="/" url="/path/to/file/" />
<Folders>
<Folder name="somefolder" />
</Folders>
<Files>
<File name="filename.jpg" size="numberOfKB" url="/path/to/file/filename.jpg" />
</Files>
</Connector> 

Integrating the File Browser

In order to integrate the default File Browser into your editor you need to set the connector to use your preferred server side language. By default, configuration is set-up to use the PHP connector (in version older than 2.5 the default is ASP), but you also can choose from ASP.NET, ColdFusion, Java, Lasso, Perl, PHP and Python.

Version 2.2 and Higher

To change the default configuration open your fckconfig.js file and look for the FileBrowserLanguage and QuickUploadLanguage settings. Change the connector language to the appropriate setting.

For example, to use the PHP connector, the configuration would look like this:

var _FileBrowserLanguage = 'php' ;
var _QuickUploadLanguage = 'php' ;


Uploading Files

To upload files to the server you will also need to:

  1. chmod 0777 the directory you want to upload to (insecure).
    NOTE: It is advisable to change the group ownership of the directory to the same user as apache and add group write permisions instead
  2. in .../connectors/php/config.php You have to set $Config['Enabled'] to TRUE
    NOTE: this is highly insecure unless you have protected the access to this directory with some kind of authentication. You can use session variables to avoid this problem.
  3. Set in $Config['UserFilesPath'] the url relative to the root where the files will be stored (example: /userfiles/)
  4. You can use the UserFilesAbsolutePath setting to specify the local folder where the files will be stored, and then in UserFilesPath you can use an absolute url like http://www.mydomain.com/myfiles/

Allow and deny extensions settings for filetypes

In editor/filemanager/connectors/(your server side language extension)/config.(extension) you can configure what extensions are allowed or denied for specific filetypes.

The filetypes you can configure are:

  • Files, e.g. : 'htm', 'html', 'php', 'php3', 'php5', 'phtml', 'asp', 'aspx', 'ascx', 'jsp', 'cfm', 'cfc', 'pl', 'bat', 'exe', 'dll', 'reg', 'cgi', 'asmx'
  • Images, e.g. : 'jpg', 'gif', 'jpeg', 'png'
  • Flash, e.g. : 'swf'
  • Media, e.g. : 'swf', 'fla', 'jpg', 'gif', 'jpeg', 'png', 'avi', 'mpg', 'mpeg'

Denying extensions will show all files except for the ones with the specified extensions, while allowing extensions will show no files except for the ones with the specified extensions. To allow all extensions for a filetype, leave both of the arrays empty for that filetype.

Set a specific directory for each file type

In the current SVN and in 2.5 it will be possible to specify if each file type should use a custom folder using the FileTypesPath and FileTypesAbsolutePath. The QuickUpload folders can be controlled with QuickUploadPath and QuickUploadAbsolutePath.

For versions up to 2.4.3, if you have to integrate FCKeditor in an existing project, there may be no possibility to use the standard filebrowser folders based on the filetype: Image, Flash, Media and File. In this case, the following comment may help you: http://sourceforge.net/tracker/index.php?func=detail&aid=1312834&group_id=75348&atid=543655

Using the File Browser outside of FCKeditor

You can use the File Browser in your pages using this code as was described here: https://sourceforge.net/tracker/index.php?func=detail&aid=1369609&group_id=75348&atid=543655

Download the code (pick.js) and put it in your website directory. You have to include this file in the page where you want to use the File Browser in.

Example: if you put pick.js in the same directory as the file in which you refer the file browser you can put this code in your heading:

<script language="JavaScript" src="pick.js" type="text/javascript"></script>

Put a button to launch the File Browser and pass the reference to the input that will receive the selected image:

<button type="button" onclick="BrowseServer('txtId');">Pick Image</button>
<input type="text" id="txtId"/>

The only thing you will have to do is modify the path to the upload connector - it is currently set for the ASP.NET version.

// File Picker modification for FCK Editor v2.0 - www.fckeditor.net
// by: Pete Forde <pete@unspace.ca> @ Unspace Interactive
var urlobj;
function BrowseServer(obj)
{
        urlobj = obj;
        OpenServerBrowser(
                '/FCKeditor/editor/filemanager/browser/default/browser.html?Type=Image&Connector=connectors/aspx/connector.aspx',
                screen.width * 0.7,
                screen.height * 0.7 ) ;
}
function OpenServerBrowser( url, width, height )
{
        var iLeft = (screen.width  - width) / 2 ;
        var iTop  = (screen.height - height) / 2 ;
        var sOptions = "toolbar=no,status=no,resizable=yes,dependent=yes" ;
        sOptions += ",width=" + width ;
        sOptions += ",height=" + height ;
        sOptions += ",left=" + iLeft ;
        sOptions += ",top=" + iTop ;
        var oWindow = window.open( url, "BrowseWindow", sOptions ) ;
}
function SetUrl( url, width, height, alt )
{
        document.getElementById(urlobj).value = url ;
        oWindow = null;
}

E.g. if you want to use PHP as a connector instead of ASP.NET use:

'/FCKeditor/editor/filemanager/browser/default/browser.html?Type=Image&Connector=connectors/php/connector.php'